Hebei retains China’s top steelmaking province in 2020
In 2020, Hebei's crude steel production, at nearly 250 million tonnes, accounted for 23.7% of China's total, as against the 24.2% for 2019, and the actual tonnage grew 8.2 million tonnes or 3.4% on year, or being lower than the 5.2% on-year growth in the national steel output, according to the NBS data.
Hebei's result was probably due to the mixed environment of the nationwide steel output growths especially the catch-up in speed since the second quarter of 2020 and the remaining close watch by Beijing on Hebei with its geographical proximity to the capital and serious air pollution locally, Mysteel Global noted.
East China's Jiangsu province also retained the second in the ranking though its steel output only inched up 911,000 tonnes or 0.8% on year to 121.1 million tonnes for 2020, and Shandong province, also in East China, surpassed Liaoning in Northeast China, becoming the third largest steelmaking province, and its output grew the most by 16.4 million tonnes or 25.7% on year to 79.9 million tonnes in 2020, the NBS data showed.
"Last year was a turning point with quiet and subtle changes when some of the Chinese steel mills that had been running at low capacity utilizations over 2018-2019 had been acquired by large-sized mills, enabling them to ramp up their output," a Shanghai-based market observer said.
Besides, the Rizhao Steel works under the ownership of Shandong Iron and Steel Group had also increased the output last year, acting as a contributor to higher steel output in Shandong, and there is still room for the new steelworks to further increase its output, he added.
"The relocation of Ji'nan Steel from Ji'nan to Rizhao in Shandong since 2017 had lowered the province's steel output, but some of the steelmaking facilities was commissioned at the end of 2019, and so production in Shandong Steel reclaimed some lost ground in 2020," he elaborated with an example.
China's steel demand for 2020 since the second quarter had been exceptionally robust with Beijing's series of economic stimulating efforts, which had supported higher output too, market sources agreed.
Among the top ten provinces, Central China's Hubei province that had been hit the worst by the pandemic outbreak, was, unsurprisingly, the only one that posted a 1.5% on-year decline in steel output to 35.6 million tonnes.
In general, the top ten steelmaking provinces and regions accounted for 72.8% of the country's total steel output last year, or 0.6 percentage point higher than for 2019, according to the NBS data.
China's top ten steelmaking provinces in 2020 (unit: million t)
Province |
2019 |
Hebei |
241.6 |
Jiangsu |
120.2 |
Shandong |
63.6 |
Liaoning |
73.6 |
Shanxi |
60.4 |
Anhui |
32.2 |
Hubei |
36.1 |
Henan |
33 |
Guangdong |
32.3 |
Inner Mongolia |
26.5 |
Total (incomplete) |
719.5 |
source: NBS
Written by Anna Wu, wub@mysteel.com
Edited by Hongmei Li, li.hongmei@mysteel.com
Industrial companies in Russia join forces to clean Arctic from scrap metal
Apr 18, 2024 13:30
NEA: China's power consumption up 10% YoY in Q1
Apr 17, 2024 17:15
NBS: China Q1 GDP up 5.3%, a good start for economy 2024
Apr 16, 2024 14:30
A Glance of the China Steel Market Week 3, April 2024
Apr 16, 2024 10:30