Terms & Conditions | Privacy Policy | Mysteel.com
Events
About Us
  • Home
  • /
  • Market Insights
  • /
  • News
  • /
  • Article

India's aluminium extrusion output falls to close to 900kt as capacity utilisation slumps near 30%

Source: AL Circle Sep 30, 2026 16:53
Share this with
X linkedin WeChat Copy this link
Aluminum Capacity Global Production

India's aluminium extrusion industry is facing mounting pressure as production has dropped while manufacturers operate at only about 30 per cent of installed capacity, prompting concerns over the viability of several factories. The Aluminium Extrusion Manufacturers Association of India (ALEMAI) has also sought the removal of the 7.5 per cent basic customs duty on primary aluminium which, together with the applicable surcharge, results in an effective duty of about 8.25 per cent, arguing that the levy is adding to raw-material costs for domestic downstream manufacturers.

 

According to the latest industry figures, India's aluminium extrusion production has declined to around 800-900 thousand tonnes, from approximately 1.2 million tonnes earlier. This compares with an installed extrusion capacity of nearly 3 million tonnes. The contraction has raised concerns about further factory closures if operating conditions do not improve.

 

Higher input costs can squeeze already-thin processing margins and make it harder for domestic producers to compete with imported finished products.

 

Aluminium imports add to pressure on domestic manufacturers

The latest industry estimates indicate that imports of aluminium extruded products have risen to around 1.5-1.6 million tonnes, significantly above domestic production of 800-900 thousand tonnes.

 

The widening gap between domestic output and imports has become a key concern for India's downstream aluminium industry. With a substantial portion of the country's extrusion capacity remaining underutilised, manufacturers are seeking policy measures that they say could improve their cost competitiveness.

 

ALEMAI has been pushing for changes to the duty structure, particularly the removal of the basic customs duty on primary aluminium. The industry body has argued that domestic extrusion manufacturers are effectively paying more for their principal raw material while competing with imported finished products.

 

Global aluminium prices intensify cost pressure

The cost challenge has become more pronounced amid the rise in global aluminium prices. Recent industry coverage puts aluminium prices at more than USD 3,200 per tonne, compared with around USD 2,600 per tonne previously.

 

How does it matter for downstream processors? It creates a difficult operating environment where aluminium prices directly influence production costs, while manufacturers still have to compete for orders in a market where imported products can put pressure on selling prices.

 

The issue extends beyond extrusion manufacturers. Recent analysis of India's downstream aluminium sector noted that aluminium can account for as much as 80 per cent of production costs for some downstream manufacturers, while margins can be considerably thinner than those of primary aluminium producers.

 

Gujarat extrusion units have faced additional disruptions

Earlier this year, aluminium extrusion manufacturers in Gujarat reported severe production constraints following disruptions to industrial gas supplies amid geopolitical tensions in West Asia. Gujarat has around 100 extrusion units with a combined capacity of about 50,000 tonnes per month, but production had fallen to approximately 15,000 tonnes per month, according to industry representatives.

 

ALEMAI President Jitendra Chopra said at the time, "The state has a total installed capacity of 50,000 tonnes per month across around 100 units. Due to the geopolitical crisis and disrupted industrial gas supply, current production is only about 15,000 tonnes."

 

The disruption reportedly forced several units to stop manufacturing, while others operated only a few days a week.

 

The severity of the energy problem was also highlighted by Reuters in April, when Chopra said several Gujarat aluminium extrusion plants had shut "four to five days after the war started due to unavailability of gas."

 

Note: This article is published in accordance with an article exchange agreement between Mysteel and AL Circle.

You May Also Like
  • EGA's Al Taweelah smelter restoration reaches 25% milestone, full output targeted in Q1 2027

    Aug 27, 2026 14:28

  • China's 15Mt overseas aluminium expansion could push global market into surplus

    Oct 29, 2026 15:33

  • EGA restarts 50% of Al Taweelah aluminium smelter, targets full production by Q1 2027

    Oct 23, 2026 15:55

  • VMI Group raises aluminium winding wire capacity to 25,000 TPA

    Oct 15, 2026 15:29

  • Why aluminium scrap grade matters when buying secondary aluminium in India

    Sep 04, 2026 15:35

Price Curve
Daily Prices
  • Aluminum prices: China's major cities

    Nov 20, 2026 12:06

  • 6063 aluminum billet (Ф178) prices: China's major regions

    Nov 20, 2026 11:58

  • 6063 aluminum billet (Ф90) prices: China's major regions

    Nov 20, 2026 11:58

  • 6063 aluminum billet (Ф120) prices: China's major regions

    Nov 20, 2026 11:58

  • Aluminum prices: Chongqing

    Nov 20, 2026 11:57

Terms & Conditions Privacy Policy Contact Us Mysteel.com
©2026 Mysteel Global Pte. Ltd. All rights reserved. ICP BeiAn No. 沪ICP备15006920号-6
Mysteel Global WhatsApp business account
Customer Service: globalsales@mysteel.com